INCRA MITER EXPRESS knows how to turn any miter gauge into a performance bolstering miter sled. It just takes a couple of seconds to make that happen by docking the gauge in place on top of the miter express sled. But this is not the only reason that draws one’s attention, there are some other features that you must know so you can think of having it when looking for one.
Table of Contents
Features of Incra Miter Express
Profile
Incra Miter Express is all about the sled with miter bar, clamp, t-track and a couple of attachments to mount your miter or fence to it. However, you won’t get the miter gauge or the fence with the package, so the advertisement picture should not confuse you.
The whole unit has been made from aluminum, you will find it light and of high quality. Its sliding and miter cutting platform factor will not only hold the work piece greatly but also control it throughout the entire cut. Another great factor is that the Miter Express is able to double the crosscut range of any miter gauge up to 24 inches.
When it comes to the miter bar, it has been made adjustable for an ideal fit in standard miter slots which will measure 3/4-inch wide by 3/8-inch deep. Basically, the adjustment range of the bar will accommodate slot widths of .740-inch to 0.760-inch to warrant the ideal fit.
The only issue you might face is that some of the Miter expresses don’t lay flat sometimes as stated by a few users. However, that is fixable.
Functioning
While the miter gauge drags your work piece on the table, this sled will slide the work piece by giving more control and support. And the result: you can observe a better and more consistent cuts. And this is how miter express functions.
So using it to cut clean miters for custom molding and picture frames is going to give you happy experience.
Moreover, its adjustable miter bar functions greatly for zero side-to side play. Even if you have any old miter gauge which has become loose in the miter slot, this miter express will make it robust and snug once you mount it to the sled.
Besides, it has also been engineered so that you can drop and lock your miter gauge as instantly as you can into the sliding platform. Once you dock, it will stay snug until you unlock it and make it a regular miter gauge.
As mentioned above, you will get a t-track with the Miter Express for securing the included clamp to fix a work piece. It will also come with a locking drop panel so that it can support the offcut as well as tear out control.
However, some users have griped that the miter slot in the miter express do not accept the T-slot gauge. In such case, you will have to take the T-slot out to enable the end piece before you place it on the miter express.
Advantages
- Double the crosscut ability of miter gauge up to 24 inches.
- Offers zero clearance for a secure and precise cut.
- Miter Gauge can be docked and locked in few seconds.
- T-slot retaining clips and miter bar is removable.
- High quality and well built.
- Cut miters clean for custom molding and picture frames.
Disadvantages
- Miter gauge or fence is sold separately.
- Might not lay flat on table saw sometimes.
- The miter slot might not accept T-slot gauge.
INCRA MITER EXPRESS
| Manufacturer | Incra |
|---|---|
| Part Number | MITEREXPRESS |
| Item Weight | 8.8 pounds |
| Product Dimensions | 14 x 2 x 25.4 inches |
| Item model number | MITEREXPRESS |
Frequently Asked Questions
Q: What do you get in the box?
A: The Miter Express includes a sled, miter bar, clamp, t-track and a couple of fixtures in the box.
Q: Can it fit a 5/8 by 1/4 miter gauge slot?
A: No, it will not fit a 5/8 by 1/4 miter gauge slot. You will need to change the miter bar for that.
We hope that you have enjoyed a lot through the guideline and reviews and you should be ready to go. Reach out our best tile saw, reciprocal saw, table saw, band saw and other saws reviews also. Thank you for being with us.
